4 Inch Lift Kit - Rear Blocks - Ford Bronco 4WD (1978-1979)
Give your 78-79 Ford Bronco an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of 7 degree c-bushings and track bar drop bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
- Increased ground clearance
- Levels the front with the rear of the vehicle
Information:
New rear blocks replace the factory rear block. A drop pitman arm is recommended for optimum turning radius and drag link alignment. (#6602) (#6602) pitman arm will NOT work if the original arm has a welded ball joint on the end. Vehicles with factory quad shocks (2 front shocks per side) will simply use a single aftermarket shock.
Application Summary:
| Year |
Make/Model |
| 1978-1979 |
Ford Bronco |
| Attributes |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Category |
Susp Lift Kits 4wd, Susp Lift Kits 4wd |
| Country of Origin (Primary) |
US |
| Front Components |
Lifted coil springs Track bar drop bracket bushings Hardware, Lifted coil springs Track bar drop bracket 7? C-bushings Hardware, Lifted coil springs/Track bar drop bracket/7 Degree C-Bushings/Hardware |
| Harmonized Tariff Code (Schedule B) |
8708801600 |
| Hazardous Material Code |
N |
| Install Time |
5-7 hours |
| Installation Time |
5-7 hours |
| Life Cycle Status Code |
Available to Order |
| Lift/Drop Height |
4 in. |
| NAFTA Preference Criterion Code |
B |
| Rear Components |
3" lift blocks U-bolts Hardware, 3 in. lift blocks/U-bolts/Hardware, 3 inch lift blocks U-bolts Hardware |
| Rear Kit Components |
3in Fabricated Lift Blocks, U-Bolts, Hardware |
| SDR Required Flag |
N |
| Shipping Group |
No Restrictions |
| Shipping Options |
No Restrictions |
| Ships in Multiple Boxes |
Y, Y |
| Tire Info |
35x12.50R15:Factory 15:5x5.5:-:-;33x12.50R16:16x8:5x5.5:+30:-;35x12.50R22:22x12:5x5.5:-44:Trimming Required |
| Tire Information |
35x12.50R15:Factory 15:5x5.5:-:-;33x12.50R16:16x8:5x5.5:+30:-;35x12.50R22:22x10:5x5.5:-19:-;295/55R22:22x10:5x5.5:-19:-;285/55R22:22x10:5x5.5:-19:-;35x12.50R22:22x10:5x5.5:-18:-;295/55R22:22x10:5x5.5:-18:-;285/55R22:22x10:5x5.5:-18:-;35x12.50R22:22x12:5x5.5:-44:Trimming Required |
| Tire, Wheel, and Offset Info |
35x12.50R15:Factory 15:5x5.5:-:- |
| Utv Product |
N |
| GTIN |
00843030127107 |
